Santa Cruz Vala C S-Kit Performance CX 600 Wh Mixed
-
Currently not available
-
Fast delivery!
-
Convenient financing with easyCredit instalment purchase
-
Purchase on account
-
Pay only after 30 days further information
The Vala is a fully-fledged e-bike that offers precision and power. It is built for those who are looking for concentrated performance on the best trails. Perfectly balanced, finely sprung and, as always, finished to the highest quality.
Attention to detail
Even if this bike looks like an ordinary four-link at first glance, we have found ways to make the much-used Santa Cruz system better, stiffer and more robust to give you lasting pleasure. We take care of the little details so you don't have to.
- A. A solid, one-piece rocker arm provides stiffness and protects the shock from lateral loads. One of many details that sets the Santa Cruz Vala apart from other four-bar bikes.
- B. The bridge between the seat stays provides additional stiffness so that the suspension runs smoothly and does not twist.
Pivot points
The main pivot points run on the legendary, conically clamped axles that Santa Cruz introduced and that are copied by many bicycle brands today. The axles cannot come loose on their own, but are easy to dismantle for maintenance.
Bearings
Four large bearings in the chainstay pivot points and an axle that holds everything securely together (no explosions on the workshop floor). No bearing puller is required to remove the bearings for maintenance.
We use larger, more robust bearings than most other brands. Larger bearings are less susceptible to contamination. So the bike rides better and lasts longer.
Hardware
- A. The geometry flip chips cannot fall out. To adjust them, simply loosen them, turn them round and tighten them again. This is so simple and quick that you can do it on the side of the road with just an Allen key.
- B. The threads in the pivot points on the chainstay, seatstay and shock mount are all replaceable. So if you cause damage because you're better at biking than wrenching, it's only a small, solvable problem as the valuable frame remains intact.
- C. All screws are designed for 5mm Allen keys, so that a quick screw check is possible at any time. No special tools are required and it's so easy to work on the bike that even the marketing people can do it (if we hide the sharp tools from them).
This bike arrives (almost) fully assembled. All you have to do is straighten the handlebars and fit the pedals.
| Frame | Carbon C |
| Frame shape | Mountainbike |
| Material | Carbon |
| Gender | Unisex |
| Weight | approx. 22.24 kg |
| permissible total weight | 130 kg |
| Fork | FOX 38 Float Performance, Grip 160mm |
| Damper | FOX Float X Performance, 205x60 |
| Manufacturer shift group | Sram |
| Rear derailleur | SRAM GX Eagle, 12spd |
| Number of gears | 1 x 12 |
| Circuit type | Kettenschaltung |
| Crank handle | E13 Helix eSpec, 160mm |
| Cassette | SRAM XG1275 Eagle, 12spd, 10-50t |
| Drive type | Kettenantrieb |
| Freewheel/coaster | Freilauf |
| Pedals included in the scope of delivery | nein |
| Rims | front: Raceface ARC 30 HD 29-inch, rear: Raceface ARC 30 HD 27.5-inch Raceface ARC 30 HD 27.5 inch |
| Hubs | front: E13 SL, 15x110, 6-bolt, 32h, rear: E13 SL E-Spec, 12x148, XD, 6-bolt, 32h |
| Wheel size | 27,5 Zoll / 29 Zoll |
| Tyres | front: Schwalbe Magic Mary, 29x2.5, Trail Radial Ultra Soft, rear: Schwalbe Magic Mary, 27.5x2.5, Gravity Radial Soft |
| Motor manufacturer | Bosch |
| Engine | Bosch Performance Line CX |
| max. torque | 85 Nm |
| Reach | up to 150 km |
| Support for | up to 25 km/h |
| Battery | Bosch 600Wh PowerTube |
| Display | no display |
| Brakes | SRAM Maven Bronze Stealth |
| Handlebars | OneUp Aluminium Bar, 35mm Rise, 800mm |
| Seat post | OneUp Dropper Post, 31.6 |
| Saddle | SDG Bel-Air V3, Max Lux-Alloy -or- WTB Volt |
| Stem | OneUp Stem -or- Burgtec Enduro MK3, 42mm |
| Accessories/Miscellaneous | Charger included in the scope of delivery |
Log in
matching accessories
suitable clothing
Online and on site
flexibly
performance ratio